The soft lines of the designer kit provides aesthetics and design to your office.

For easy-to-clean upholstery, the smooth kit is the way to go.

MTI's TB133 option meets the California Technical Bulletin #133 (CAL-133) for flammability testing for seating furniture for use in public occupancies. MTI achieves compliance without the use of flame retardants. This option can be added to any upholstered item containing foam.

WATCH VIDEO Deep Oval Articulating Headrest is another very popular headrest is you always want your patient's head located in the middle of the headrest. The deep cushion also provides the patient with security as the cushion secures their head onto the cushion. The intuitive locking system is much easier to adjust than competitive lock systems. With a slight turn of the knob, the headrest articulates in two locations making virtually any position possible. Even with the back horizontal to the floor, the knob is easy to adjust. The headrest can also be vertically adjusted by a knob located on the chair back.

WATCH VIDEO Deep Oval Articulating Headrest with Forearm Supports is one of our most popular headrests. The forearm supports are used to support the assistant's arms when chinning, reducing staff fatigue when supporting a patient’s head during a procedure. The supports are removable and pivot. The resilient urethane closed cell molded construction is far superior in comfort to the machined, hard plastic or the sandwiched vinyl construction of competitive forearm support headrests. The deep cushion also provides the patient with security as the cushion secures their head onto the cushion. The intuitive locking system is much easier to adjust than competitive lock systems. With a slight turn of the knob, the headrest articulates in two locations making virtually any position possible. Even with the back horizontal to the floor, the knob is easy to adjust. The headrest can also be vertically adjusted by a knob located on the chair back.

WATCH VIDEO Prosthetic or Cradle Articulating Headrest provides excellent access to the patient's head, especially the crown of the head. The cushion is 4” (10.2 cm) high x 8” (20.3 cm) wide. It has an extra lock mechanism for position the head in just the right position. The intuitive locking system is much easier to adjust than competitive lock systems. With a slight turn of the knob, the headrest articulates in two locations making virtually any position possible. Even with the back horizontal to the floor, the knob is easy to adjust. The headrest can also be vertically adjusted by a knob located on the chair back.

WATCH VIDEO Prosthetic or Cradle Articulating Headrest with Forearm Supports provides excellent access to the patient's head, especially the crown of the head. The forearm supports are used to support the assistant's arms when chinning, reducing staff fatigue when supporting a patient’s head during a procedure. The supports are removable and pivot. The resilient urethane closed cell molded construction is far superior in comfort to the machined, hard plastic or the sandwiched vinyl construction of competitive forearm support headrests. The cushion is 4” (10.2 cm) high x 8” (20.3 cm) wide. It has an extra lock mechanism for position the head in just the right position. The intuitive locking system is much easier to adjust than competitive lock systems. With a slight turn of the knob, the headrest articulates in two locations making virtually any position possible. Even with the back horizontal to the floor, the knob is easy to adjust. The headrest can also be vertically adjusted by a knob located on the chair back.

WATCH VIDEO The Oval Articulating Headrest is one of our most popular headrests. The dimple in the headrest makes the patient's head very comfortable and keeps the it located in the middle of the headrest. The intuitive locking system is much easier to adjust than competitive lock systems. With a slight turn of the knob, the headrest articulates in two locations making virtually any position possible. Even with the back horizontal to the floor, the knob is easy to adjust. The headrest can also be vertically adjusted by a knob located on the chair back.

WATCH VIDEO The Oval Articulating Headrest with Forearm Supports is one of our most popular headrests. The forearm supports are used to support the assistant's arms when chinning, reducing staff fatigue when supporting a patient’s head during a procedure. The supports are removable and pivot. The resilient urethane closed cell molded construction is far superior in comfort to the machined, hard plastic or the sandwiched vinyl construction of competitive forearm support headrests. The dimple in the headrest makes the patient's head very comfortable and keeps the it located in the middle of the headrest. The intuitive locking system is much easier to adjust than competitive lock systems. With a slight turn of the knob, the headrest articulates in two locations making virtually any position possible. Even with the back horizontal to the floor, the knob is easy to adjust. The headrest can also be vertically adjusted by a knob located on the chair back.

WATCH VIDEO Rectangular Articulating Headrest is beneficial if you need to move the patient's head around the headrest for different procedures. The cushion is 8” (20.3 cm) high x 12” (30.5 cm) wide. The intuitive locking system is much easier to adjust than competitive lock systems. With a slight turn of the knob, the headrest articulates in two locations making virtually any position possible. Even with the back horizontal to the floor, the knob is easy to adjust. The headrest can also be vertically adjusted by a knob located on the chair back.

WATCH VIDEO Round Articulating Headrest is used when access to the entire head is needed. The cushion is 6" (15.2 cm) in diameter. It has an extra lock mechanism for position the head in just the right position. The intuitive locking system is much easier to adjust than competitive lock systems. With a slight turn of the knob, the headrest articulates in two locations making virtually any position possible. Even with the back horizontal to the floor, the knob is easy to adjust. The headrest can also be vertically adjusted by a knob located on the chair back.

Add an optional 340-degree swivel base. Actuated by pressing a button on the control, the swivel brake electronically unlocks. Pressing the swivel button again will lock the swivel. For safety and security, the swivel will automatically lock after 6 seconds. There are no gears to break or pads to wear out with our swivel lock. - Adds 1 3/4” (4.4 cm) to height of chair - Factory Installed - Not available with Foot Control Slant Mount

Casters with individual locks mount in place of the leveling glides. These casters provide mobility without sacrificing valuable floor space. > Raises base height 3.75" (9.5 cm)

MTI's Quad Function Programmable Hand Control has 4 user-programmable positions allowing you to put the table into your favorite positions automatically with the simple touch of a button and an auto return button for quick and easy return to the chair position. One of several types of controls available for your MTI chair. A convenient hook which can be mounted on either side chair's backrest or on the removable patient arms (if ordered); making an easy place to hang your hand control so it is out of your way, but still easy to reach. 4 user-programmable positions Auto return to chair position Stop button or press any function to stop the chair for emergency situations

The MTI G1.1 3-Function Programmable Foot Control has 3 user-programmable positions allowing you to put the table into your favorite positions automatically with the simple touch of a button and an auto return button for quick and easy return to the chair position. This foot control has the following features:

• Sealed Membrane Cover
• 3-Programmable Buttons
• Home Button
• Light Weight
• Backwards compatible to all MTI 527/527W Chairs

The Lumerus™ LED Exam Light is MTI’s longest lasting, compact, environmentally friendly examination light. This compact light flexible neck rates at 70,000 hours of average life with a 2.25" (5.7 cm) head size. The flexible gooseneck design allows excellent positioning for any exam. > 1 White LED > 70,000 hour rate LED > 4,100° K +/- 300° K > Light Intensity @ 16" (40.6 cm): 24,800 lux (2,300 fc) > Spot Size @ 16" (40.6 cm): 5” (12.7 cm) dia > CRI: 80 > 5-year limited warranty *Assumes 8 hours of continual use/day, 5 days a week for 52 weeks/year. Actual LED life may be longer. > Requires 1” (2.5 cm) post

This accessory provides a 3' hospital grade power cord w/90 degree plug for static mounting. (Not available for mobile or swivel base option)

Accessory Rail Mounting Bracket for mounting fiber optic lights, electro-cautery devices, and other accessories conveniently to your chair saving valuable floor space. > Accepts Conmed 2000 and Bovie Aaron 940/950 hyfrecators, and Welch Allyn Exam Light III #48700. > Requires Base Rails or Base Mounting Rail > Not available with Swing Up/Down Bed Rails

Improve the safety of your patients by securing your patient to chair during and after procedures. To accommodate different patient demographics, the restraint strap width is adjustable.

WATCH VIDEO This mount allows you to place your foot control out of your way. The slight angle provides clear and easy access to your foot control. Also you are able to remove the foot control without the use of any tools. > not available with swivel base option

The IV rod can attach to either side of the chair, saving valuable floor space, and is vertically adjustable.

• Patient left or right mounted options are available

Improve the safety of your patients by securing your patient to chair during and after procedures. To accommodate different patient demographics, the restraint strap width is adjustable.

This option replaces the standard leveling glides with 2" (5.1 cm) leveling glides for those requiring a table that goes even higher than the standard heights. > Other heights are available upon request

The base mounted mayo tray fits the 430, 450, and 530 Tables providing a vertically adjustable mayo tray with two articulating arms to position the tray (360 degrees) in the desired location. The mayo tray is stainless steel and is removable for easy cleaning and tray swapping. > Right & Left Handed mounts are available

Flexible Mayo Tray with vertical adjustment (19” x 12”)(48.3 cm x 30.5 cm). Use on a 2" (5.1 cm) post, this monitory tray has a counter balanced spring arm. Simply move the mayo tray up or down with or without weight on it and the arm will stay in place. It also rotates 360°. > Requires 2" (5.1 cm) post

This mount provides a post location on the 430, 450, and 530 Tables to mount monitor trays and other accessories. This mount is specifically made for the patient's right hand side of the table.

Patient Monitor Tray (15 1/8” x 10 1/8”)(38.4 cm x 25.7 cm). Used on a 2" (5.1 cm) post, this monitor tray is vertically adjustable up/down the poll and rotates 360°. > Requires 2" (5.1 cm) post